Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
-
-
-
-
-
-
Red 5 volt 3mm Joystick LED
Custom made for our hollow shafts, these 3mm LEDs need 5volts DC to light your balls!
$0.50 -
3 Connection .110 Daisy Chain
This 3 connection daisy chain is perfect for your home, guide, start and turbo buttons in your joystick.
$1.75 -
Green 5 volt 3mm Joystick LED
Custom made for our hollow shafts, these 3mm LEDs need 5volts DC to light your balls!
$0.50 -
Neutrik NE8MC RJ45 Data Connector
Protect your Neutrik RJ45 connection with this Neutrik NE8MC RJ45 Cable Connector Carrier.
$7.50 -
Xin Mo Arcade Controller to USB - PC or PS3
Rocking simple 2 arcade controller to USB adapter. Plug and play for Windows on 2 Joysticks with 10 buttons on 1 and 12 on the other!
$25.00 -
Arcade Jamma Wiring Harness
58 pin Jamma harness with .187 connects for joysticks and buttons, makes cabinet conversion to multis a breeze.*Black or Blue Edge Connector*
$7.50 -
-
Arcade CRT Monitor Degaussing Wand
Color distortion on your arcade monitor? Just wave this "magic" wand to make everything better!
$20.00 -
Rollie Leaf Switch for Pushbutton
Rollie leaf switches turn your regular microswitch pushbuttons into authentic leaf switch buttons!
$2.75 -
MC Cthulhu Multi-console PCB by Toodles
The standard in multiconsole is back, the Toodles MC Cthulhu.
$35.00 -
4 wire .100 header wiring harness
.100 female 4 pin header with color coded 50cm wires and .187 female quick connects.
$0.75 -
-
-
Cherry Pushbutton Microswitch
The original arcade microswitch, the 75 gram Cherry microswitch.
$1.75 -
-
-
JLF .187 Micro Harness
This harness allows you to easily connect your JLF plug to .187 micros. (Please note this is just the harness, not the micros)
$6.95 -
-
OMRON B2R-G1
The OMRON B2R-G1 is the same switch used in Sanwa's OBSF-30RG or Sanwas's OBSN-30RG pushbutton
$4.50 -
-
Paradise Kaimana Mini LED Driver PCB
The new Paradise Kaimana Mini LED controller pcb - endless possibilities in a small package!
$29.95 -
Rebuilt Wells Gardner 19" K7000 Arcade...
Rebuilt, burned in and ready to get your K7000 19" up and going!
$150.00 -
-
Monitor (Width Coil) Adjustment Tool Set
Just what you need to get your new monitor chassis perfectly adjusted! A 3 piece monitor adjustment tool set.
$11.95 -
-
Undamned Neo Geo Adapter for DB15 USB Decoder
The ONLY Programmable Neo Geo Converter on the market!UD-DB15-USB Decoders allow you to control discrete arcade devices with DB15 connections using your favorite XBOX 360 or PS3 Controller, enjoy the same quality NOW on your Neo Geo AES, MVS, or CD gaming system!
$5.00 -
-
DarkSoft CPS2 Extension Cable
Amazing way to create your own multi CPS-2 system brought to us by DARKSOFT
$23.00 -
Brook Universal Fighting Board for Neo-Geo...
Brook's Universal Fighting Board is a controller PCB compatible with Neo-Geo Mini, PC, PS Classic, PS3, PS4, Switch, Wii U, Xbox 360, & Xbox One.
$89.99 -
G07-CBO 19" Color Monitor Cap Kit
Arcade monitor "be well" kit for your Electrohome G07-CBO 19" color monitor
$8.95 -
Single Board 6-Way Jamma Switcher by...
Single Board 6-Way Jamma Switcher Designed by RiddledTV
$120.00 -
PS2 to PS3/PS4 Super Converter
This PS2 to PS3/PS4 Converter allows you to use your PS2 device on a PS3/PS4 system.
$29.99 -
Kortek KT-2914F Monitor Repair Kit by Zanen
This monitor repair kit is designed for the Kortek KT-2914F color monitor.
$19.95 -
Blue 22 awg Wire, 2 x .100 female header,...
25cm Blue 22awg wire with .100" female pin header crimped on one end, and a .110" insulated female quick connect on the other
$0.50 -
Amplifone X-Y 19" and 25" Monitor Repair...
This monitor repair kit is designed for the Amplifone X-Y 19" and 25" monitors.
$19.95 -
Hantarex Polo Monitor Repair Kit by Zanen
This monitor repair kit is designed for the Hantarex Polo monitor.
$9.95 -
16 Wire Rainbow Pack(TM) with .187" Quick...
16 wire color variety pack with .187" insulated female quick connects
$7.50 -
16 Wire Rainbow Pack(TM) with .250" Quick...
16 wire color variety pack with .250" insulated female quick connects
$7.50 -
-
-
Williams Power Supply Replacement by...
Custom switching power supply adapter with coin door lighting and lockout power
$69.99 -
-
Molex Style KK 396 (.396 mm) 2 Pin Connector
Equivalent to the Molex KK 396 Female with 2 pins
$0.20 -
Neutrik SCDP Rubber Sealing Gasket for USB...
Neutrik's SCDP sealing gasket provides a dust and water resistant seal for Neutrik USB pass-through sockets.
$2.95 -
-
I-PAC ULTIMATE I/O
48-Input, 96 output button/joystick/LED/trackball/spinner interface. Includes ALL wiring for 2 player controls. Includes LED power cable and USB cable. Please check "more info" link for additional harness requirements for non-RGB LEDs and 4 players.
$99.00 -
OBS-MX DIY PCB NO SWITCH
Paradise Arcade Shop's very own OBS-MX DIY PCB Board and wire *No Switch*
$1.75 -
K4600 19" Color Monitor Cap Kit
Arcade monitor "be well" kit for your Wells Gardner K4600 19" color monitor
$7.95 -
-
Neotec NT Series Monitor Repair Kit by Zanen
This monitor repair kit is designed for the Neotec NT series monitors.
$10.95 -
mini-SLG by CraftyMech
The mini-SLG is a small format scan line generator by CraftyMech for creating classic images on modern monitors
$15.00 -
-
Ultra Light Touch Microswitch
Zippy offers a great high quality microswitches for a great price, these ultra light touch are perfect for any control panel.
$0.85 -
CraftyMech TPG
The TPG is a 9V battery operated test pattern generator for Standard & Medium Resolution arcade monitors (15khz/24khz)
$89.00
Categories
- Components
- Monitor Tools & Supplies
- PCBs & Lighting
- Wiring & Power
