The mini-SLG is a small format scan line generator by CraftyMech for creating classic images on modern monitors
Warning: Last items in stock!
The mini SLG is an inexpensive, and compact scanline generator that is compatible with devices that output a standard VGA signal @ 640×480 (preferred) & 1024×768 resolutions.
Male/Female VGA connectors. Simply plug one end into your video source, and the other into your monitor cable.
ON/OFF switch. Enable scanlines or pass through video signal unaffected.
Compact. Only 2.25 inches in length.
A VGA upscaler, such as the GBS-8200, is required for 15k RGB sources.
The mini SLG is not compatible with ArcadeSD or JROK Multi-Williams boards.
mini SLG Instructions
Connect the male adapter of the mini SLG to the video source, and the female adapter to the monitor cable. Best results are obtained at 640x480* resolution (1024x768* is also supported). Other resolutions will pass-through the adapter, resulting in a normal display. To display a MAME front-end (Hyperspin, Mala, etc.) without scanlines, a popular resolution is 1280x1024 (set games to run at 640x480). The switch has two positions: ON (scanlines), and OFF (pass-through). * For PC video cards, the vertical refresh rate should be 60 HZ. www.craftymech.com Contact: firstname.lastname@example.org