UD-DB15-USB Decoders allow you to control discrete arcade devices with DB15 connections using your favorite XBOX 360 or PS3 Controller!
The original arcade microswitch, the 75 gram Cherry microswitch.
User standard LEDs with your Kaimana LED Driver board
Sanken 130V regulator for select K7000 Chassis.
Play all the classics on an easy to install Jamma board and now with scanlines on your VGA monitor!
Jasen's Customs EZ mod for the Madcatz TE2
Siren is an add-on PCB for the Magenta joystick allowing you to add addtinional functionality such as swapping profiles using a magnet
Paradise Arcade Shop .250" Male Quick Connect
10 Pack Rainbow Wire Set with locking .187 female quick disconnects
Warm white, 9 lumens(matched to 44/47 output), bubble top to look like a bulb, 6.3VAC non polar.
Small little board that packs a big punch. Use this as your controller board for an amazingly fast PS3/PS4 connection.
Rebuilt, burned in and ready to get your GO7 19" up and going!
The LVT3 is a complete LED and LED Controller Board in one for fully reponsive RGB LEDs in your Mad Catz TE2+ joystick
3m (10 foot) USB-B to USB-A Cable
Arcade monitor "be well" kit for your Electrohome GO5 19" black and white X/Y
450 Watt ATX computer power supply, perfect for the xxxx in 1
This PS3 to PS4 Converter allows you to use your PS3 device on a PS4 system.
6-Way Player 3/4 Condenser
10 pack of 25cm 22awg wires with .100" female pin header crimped on one end, and a .110" insulated female quick connect on the other
2 Player PC interface for buttons and joysticks
Easily wire up 14 LED buttons with this color coded harness
10 .110 insulated female quick connects on 10cm wire leads to make wiring easy and fast.
Equivalent to the Molex KK 396 Female with 4 pins
Zippy offers a great high quality microswitches for a great price, lever arm microswitches are common in many joysticks.
Neutrik's SCDP sealing gasket provides a dust and water resistant seal for Neutrik USB pass-through sockets.
Equivalent to the Molex KK 254 Female with 6 pins
Equivalent to the Molex KK 254 Male with 10 pins
Arcade monitor "be well" kit for your Wells Gardner K4800 13" color monitor
This monitor repair kit is designed for the Neotec NT-2500 series monitors.
Custom made for our hollow shafts, these 3mm Yellow LEDs need 5volts DC to light your balls!
K7000 flyback for your Wells Gardner monitor.
Rocking simple 1 arcade controller to USB adapter. Plug and play for Windows with 1 joystick and 12 button connections.
Standard Jamma 36 pin connector, make your own harness or adapter.
Orange wire with .110" insulated female quick connects.
PhreakMods CROSSBONE PadHack PCB. XBOX ONE pad hacking made easy.
TP-MA is a replacement microswitch PCB for your Sanwa JLF Joystick.
This monitor repair kit is designed for the Sanyo 14" color monitor.
High Quality Raychem Heat Shrink in 0.5" diameter by 1" long
BLUE 12 volt led for our import led pushbuttons
What to make your JLF Smooth and quiet, we have the kit for you!
RGB/CGA/EGA/YUV to VGA HD Video converter to get those old favorites onto your new screen. Easy to use, auto scan with on screen menu.
Sanken 123V regulator for select K7000 Chassis.
JAMMA multigame to Pacman harness adapter, no extra power supply needed
The ultimate Mag Stik PLus mod: stainless shaft, milky white ball, slip ring, and 5mm RGB LED
The OMRON B2R-G1 is the same switch used in Sanwa's OBSF-30RG or Sanwas's OBSN-30RG pushbutton
Color changing party time, bubble top to look like a bulb, 6.3VDC non polar.
If Black Widow wasn't amazing enough, this board adds to more Vector Classics!
Replacement Genuine Sanwa JLF wiring harness
Looking for a 20 pin breakout for your Kaimana Mini or other 20 pin device?
Arcade monitor "be well" kit for your Electrohome G05-801 Black and White X/Y Monitor
This PS3 to Xbox One Converter allows you to use your PS3 device on an Xbox One system.
25cm Brown 22awg wire with .100" female pin header crimped on one end, and a .110" insulated female quick connect on the other
The Brook PS3/PS4 Fighting Board Plus is an easy to set up controller PCB that supports PS3, PS4, and PC.
The Howler Open Source Arcade Controller is a 4 joystick, 26 button, infinitely configurable arcade controller and 96 channel LED driver in one.
30 .187" insulated female quick connects on 10cm Red wire leads to make wiring easy and fast.
Equivalent to the Molex KK 396 Female with 5 pins
Equivalent to the Molex KK 254 Female with 7 pins
Ultimate 645 in 1 Multigame Jamma PCB
480 Watt ATX computer power supply, perfect for the xxxx in 1
Enter your email
Copyright © 2016 ParadiseArcadeShop.com . All rights reserved.